DAVE3700 konteeksamen 2024 – løsningsforslag
Matte 3000 at OsloMet: every exercise from the exam, with answers and step-by-step solutions. Try it yourself first – the solution is under each exercise.
februar 2024
Exercises
5 exercises
Exercise 1
Consider the function We want to find the maxima and minima of this function restricted to the ellipse
Exercise 1a)
Write down the Lagrange equations for this problem.
Show solutionHide solution for exercise 1a
Answer
We write the constraint as \( {g(x, y) = 0}\text{,} \) find the gradients of \( f \) and \( g\text{,} \) and put them into Lagrange's method.
1. Draw a sketch
We draw a sketch first. The points we are looking for lie on the ellipse:
2. Write down Lagrange's method
Lagrange's method tells us that at the critical points:
\[ \nabla f = \lambda \nabla g, \qquad g(x, y) = 0 \]If you are unsure about the method, you can watch the video Lagranges metode.
We move everything to one side in the constraint:
\[ g(x, y) = 2x^2 + y^2 - 2 \]
3. Find the gradients
The gradient is made up of the partial derivatives, as in the video Finn de kritiske punktene til f ved å bruke Lagranges metode:
\[ \begin{aligned} \nabla f &= \left(\dfrac{\partial f}{\partial x},\ \dfrac{\partial f}{\partial y}\right) = (\textcolor{blue}{2},\ \textcolor{red}{2y}) \\ \nabla g &= \left(\dfrac{\partial g}{\partial x},\ \dfrac{\partial g}{\partial y}\right) = (\textcolor{blue}{4x},\ \textcolor{red}{2y}) \end{aligned} \]
4. Set up the equations
Plugging this into \( {\nabla f = \lambda \nabla g}\text{,} \) we get one equation for each coordinate. The third equation is the constraint:
\[ \begin{aligned} \textcolor{blue}{2} &= \lambda \cdot \textcolor{blue}{4x} \\ \textcolor{red}{2y} &= \lambda \cdot \textcolor{red}{2y} \\ 2x^2 + y^2 &= 2 \end{aligned} \]
Exercise 1b)
Find all the solutions to the Lagrange equations.
Show solutionHide solution for exercise 1b
Answer
The Lagrange equations have four solutions:
We use the equations from a).
We can factor the second equation. That gives us two cases, and the constraint gives the points in each of them.
1. Factor the second equation
In a) we found the Lagrange equations:
\[ \begin{aligned} 2 &= 4\lambda x \\ 2y &= 2\lambda y \\ 2x^2 + y^2 &= 2 \end{aligned} \]These are three equations in three unknowns, \( x\text{,} \) \( y \) and \( \lambda\text{,} \) as in the video Finn de kritiske punktene til f ved å bruke Lagranges metode.
We move everything to the left-hand side of the second equation and factor out \( 2y\text{:} \)
\[ \begin{aligned} 2y - 2\lambda y &= 0 \\ \textcolor{darkorange}{2y}\,\textcolor{magenta}{(1 - \lambda)} &= 0 \end{aligned} \]
A product is zero only when one of the factors is zero:
\[ \textcolor{darkorange}{y = 0} \quad \text{or} \quad \textcolor{magenta}{\lambda = 1} \]
2. Solve the first case
Putting \( {\textcolor{darkorange}{y = 0}} \) into the constraint, we get:
\[ \begin{aligned} 2x^2 + 0 &= 2 \\ x^2 &= 1 \\ x &= \pm 1 \end{aligned} \]
The first equation gives a \( \lambda \) for each of them:
\[ \lambda = \dfrac{2}{4x} = \pm\dfrac{1}{2} \]That gives the points \( (1, 0) \) and \( {(-1, 0)}\text{.} \)
3. Solve the second case
Putting \( {\textcolor{magenta}{\lambda = 1}} \) into the first equation, we get:
\[ 2 = 4x \quad \Rightarrow \quad x = \dfrac{1}{2} \]
The constraint gives \( y\text{:} \)
\[ \begin{aligned} 2 \cdot \left(\dfrac{1}{2}\right)^2 + y^2 &= 2 \\ y^2 &= \dfrac{3}{2} \\ y &= \pm\sqrt{\dfrac{3}{2}} = \pm\dfrac{\sqrt{6}}{2} \end{aligned} \]That gives the points \( {\left(\dfrac{1}{2}, \dfrac{\sqrt{6}}{2}\right)} \) and \( {\left(\dfrac{1}{2}, -\dfrac{\sqrt{6}}{2}\right)}\text{.} \)
4. Find the largest and smallest values
The ellipse is closed and bounded, so \( f \) has a largest and a smallest value on it, and they lie at these points. We put them into \( {f(x, y) = 2x + y^2}\text{:} \)
\[ \begin{aligned} f(1, 0) &= 2 \\ f(-1, 0) &= -2 \\ f\left(\dfrac{1}{2}, \pm\dfrac{\sqrt{6}}{2}\right) &= 1 + \dfrac{3}{2} = \dfrac{5}{2} \end{aligned} \]
This means that:
\[ \begin{aligned} f_{\text{max}} &= f\left(\dfrac{1}{2}, \pm\dfrac{\sqrt{6}}{2}\right) = \dfrac{5}{2} \\ f_{\text{min}} &= f(-1, 0) = -2 \end{aligned} \]
Exercise 2
- Flere oppgaver om buelengde,
- Flere oppgaver om integrasjon,
- Flere oppgaver om parameterframstilling,
- Flere oppgaver om vektorer
Consider the curve parametrized by
Exercise 2a)
Determine a unit tangent vector to the curve
Show solutionHide solution for exercise 2a
Answer
The derivative \( \vec{r}\,'(t) \) is a tangent vector. We divide it by its length, so that it has length \( 1\text{.} \)
1. Draw a sketch
We draw a sketch first. The curve is the graph of \( {y = e^x} \) from \( (0, 1) \) to \( (1, e)\text{:} \)
2. Find a tangent vector
We differentiate each coordinate separately and get a tangent vector, as in the video Regn ut linjeintegralet ved å bruke definisjonen:
\[ \vec{r}\,'(t) = (\textcolor{blue}{1},\ \textcolor{red}{e^t}) \]
3. Divide by the length
We get a unit vector by dividing the vector by its length, as in the same video Regn ut linjeintegralet ved å bruke definisjonen:
\[ \vec{T}(t) = \dfrac{\vec{r}\,'(t)}{\textcolor{green}{|\vec{r}\,'(t)|}} \]
We find the length with Pythagoras, as in the video Lengden til en Vektor:
\[ \textcolor{green}{|\vec{r}\,'(t)|} = \sqrt{\textcolor{blue}{1}^2 + (\textcolor{red}{e^t})^2} = \textcolor{green}{\sqrt{1 + e^{2t}}} \]
Plugging this in, we get:
\[ \vec{T}(t) = \dfrac{1}{\textcolor{green}{\sqrt{1 + e^{2t}}}}\,(\textcolor{blue}{1},\ \textcolor{red}{e^t}) \]
Exercise 2b)
Determine a unit normal vector to the curve
Show solutionHide solution for exercise 2b
Answer
One unit normal vector is:
We use the tangent vector from a).
A normal vector is perpendicular to the tangent vector. In the plane we get such a vector by swapping the coordinates and changing the sign of one of them.
1. Find a normal vector
In a) we found the tangent vector:
\[ \vec{r}\,'(t) = (\textcolor{blue}{1},\ \textcolor{red}{e^t}) \]
As in the video Regn ut linjeintegralet ved å bruke definisjonen, we swap the coordinates and change the sign of the first one:
\[ (\textcolor{blue}{a},\ \textcolor{red}{b}) \;\Rightarrow\; (-\textcolor{red}{b},\ \textcolor{blue}{a}) \]
Here \( {\textcolor{blue}{a} = \textcolor{blue}{1}} \) and \( {\textcolor{red}{b} = \textcolor{red}{e^t}}\text{,} \) so we get:
\[ (-\textcolor{red}{e^t},\ \textcolor{blue}{1}) \]
The dot product with the tangent vector is \( 0\text{,} \) so they are perpendicular to each other:
\[ (\textcolor{blue}{1},\ \textcolor{red}{e^t}) \cdot (-\textcolor{red}{e^t},\ \textcolor{blue}{1}) = -e^t + e^t = 0 \]
2. Divide by the length
The new vector has the same length as the tangent vector:
\[ \textcolor{green}{|(-e^t,\ 1)|} = \sqrt{e^{2t} + 1} = \textcolor{green}{\sqrt{1 + e^{2t}}} \]
We divide by the length, as in a):
\[ \vec{n}(t) = \dfrac{1}{\textcolor{green}{\sqrt{1 + e^{2t}}}}\,(-\textcolor{red}{e^t},\ \textcolor{blue}{1}) \]The vector \( {-\vec{n}(t)} \) points the opposite way and is also a unit normal vector.
Exercise 2c)
Write down the integral that computes the length of using the parametrization Compute its approximate value by using the approximation
Show solutionHide solution for exercise 2c
Answer
The length of and its approximate value, rounded to two decimal places:
The length is the integral of the speed \( |\vec{r}\,'(t)|\text{.} \) The task asks for an approximate value, so we use the approximation with \( {u = e^{2t}}\text{.} \)
1. Write down the integral
The arc length of a parametrized curve is:
\[ L = \int_a^b \sqrt{\left(\textcolor{blue}{\dfrac{dx}{dt}}\right)^2 + \left(\textcolor{red}{\dfrac{dy}{dt}}\right)^2}\,dt \]If you are unsure about the formula, you can watch the video Regn ut buelengden.
Here:
\[ \begin{aligned} \textcolor{blue}{\dfrac{dx}{dt}} &= \textcolor{blue}{1} & \textcolor{red}{\dfrac{dy}{dt}} &= \textcolor{red}{e^t} \\ a &= 0 & b &= 1 \end{aligned} \]
Plugging this in, we get:
\[ \begin{aligned} L &= \int_0^1 \sqrt{\textcolor{blue}{1}^2 + (\textcolor{red}{e^t})^2}\,dt \\ &= \int_0^1 \sqrt{1 + e^{2t}}\,dt \end{aligned} \]
2. Use the approximation
We put \( {\textcolor{green}{u} = \textcolor{green}{e^{2t}}} \) into the approximation:
\[ \sqrt{1 + \textcolor{green}{e^{2t}}} \approx 1 + \dfrac{\textcolor{green}{e^{2t}}}{2} \]
We integrate an exponential function like this, as in the video Basic integrasjonsregler/formler:
\[ \int e^{nt}\,dt = \dfrac{1}{n}e^{nt} + C \]
With \( {n = 2} \) we get:
\[ \begin{aligned} L &\approx \int_0^1 \left(1 + \dfrac{e^{2t}}{2}\right) dt \\ &= \left[t + \dfrac{e^{2t}}{4}\right]_0^1 \\ &= 1 + \dfrac{e^2}{4} - \dfrac{1}{4} \\ &= \dfrac{e^2 + 3}{4} \approx 2.60 \end{aligned} \]
Merk – The approximation is rough here: The approximation is good when \( u \) is close to \( 0\text{.} \) Here \( {u = e^{2t}} \) goes from \( 1 \) to \( e^2\text{,} \) so it overestimates: the actual length is about \( 2.00\text{.} \)
Exercise 3
- Flere oppgaver om greens teorem,
- Flere oppgaver om linjeintegraler,
- Flere oppgaver om parameterframstilling
Consider the two-dimensional vector field given by
Exercise 3a)
Compute the line integral where is the (oriented) segment from the point to the point
Show solutionHide solution for exercise 3a
Answer
We parametrize the segment from \( A \) to \( B \) and put it into the formula for the line integral.
1. Draw a sketch
We draw a sketch first:
2. Parametrize the segment
We start at \( A \) and go along the vector from \( A \) to \( B\text{:} \)
\[ \overrightarrow{AB} = (2 - 1,\ 2 - 0) = (1,\ 2) \]
That gives the parametrization:
\[ \begin{aligned} \vec{r}(t) &= A + t \cdot \overrightarrow{AB} \\ &= (1 + t,\ 2t), \quad 0 \le t \le 1 \end{aligned} \]We check the endpoints as in the video Oppgave 4A - Del 2 - R1 Eksamen Høst 2025: \( {t = 0} \) gives \( A\text{,} \) and \( {t = 1} \) gives \( B\text{.} \)
3. Write down the formula
The line integral of a vector field is:
\[ \int_C \vec{F} \cdot d\vec{r} = \int_a^b \vec{F}(\vec{r}(t)) \cdot \vec{r}\,'(t)\,dt \]If you are unsure about the formula, you can watch the video Linjeintegral i vektorfelt & Arbeid.
Here \( {x = 1 + t} \) and \( {y = 2t}\text{,} \) so:
\[ \begin{aligned} \vec{F}(\vec{r}(t)) &= (\textcolor{blue}{-2t},\ \textcolor{red}{1 + t + 2t}) \\ &= (\textcolor{blue}{-2t},\ \textcolor{red}{1 + 3t}) \\ \vec{r}\,'(t) &= (\textcolor{blue}{1},\ \textcolor{red}{2}) \end{aligned} \]
4. Compute the integral
We get the dot product by multiplying the coordinates in pairs and adding:
\[ \begin{aligned} (\textcolor{blue}{-2t}, \textcolor{red}{1 + 3t}) \cdot (\textcolor{blue}{1}, \textcolor{red}{2}) &= \textcolor{blue}{-2t} + \textcolor{red}{2 + 6t} \\ &= 2 + 4t \end{aligned} \]
Plugging this into the formula, we get:
\[ \int_C \vec{F} \cdot d\vec{r} = \int_0^1 (2 + 4t)\,dt \]
The power rule tells us that:
\[ \int t^n\,dt = \dfrac{t^{n+1}}{n+1} + C, \quad n \neq -1 \]If you are unsure about the rule, you can watch the video Basic integrasjonsregler/formler.
We integrate term by term:
\[ \int_0^1 (2 + 4t)\,dt = \Big[2t + 2t^2\Big]_0^1 = 4 \]
Exercise 3b)
Compute the line integral where is the circle considered with positive orientation.
Show solutionHide solution for exercise 3b
Answer
The curve is closed and goes counterclockwise. Then we can use Green's theorem and compute a double integral over the disk instead.
1. Draw a sketch
We draw a sketch first. Positive orientation means counterclockwise, and \( D \) is the disk inside:
2. Write down Green's theorem
When \( {\vec{F} = (\textcolor{blue}{P},\ \textcolor{red}{Q})} \) and \( C \) goes counterclockwise around \( D\text{,} \) Green's theorem tells us that:
\[ \oint_C \vec{F} \cdot d\vec{r} = \iint_D \left(\dfrac{\partial \textcolor{red}{Q}}{\partial x} - \dfrac{\partial \textcolor{blue}{P}}{\partial y}\right) dA \]If you are unsure about Green's theorem, you can watch the video Greens setning.
Here:
\[ \begin{aligned} \textcolor{blue}{P} &= \textcolor{blue}{-y} & \dfrac{\partial \textcolor{blue}{P}}{\partial y} &= \textcolor{blue}{-1} \\ \textcolor{red}{Q} &= \textcolor{red}{x + y} & \dfrac{\partial \textcolor{red}{Q}}{\partial x} &= \textcolor{red}{1} \end{aligned} \]
3. Compute the double integral
Plugging this in, we get:
\[ \begin{aligned} \oint_C \vec{F} \cdot d\vec{r} &= \iint_D \big(\textcolor{red}{1} - (\textcolor{blue}{-1})\big)\,dA \\ &= 2 \iint_D dA \end{aligned} \]
The integral \( \iint_D dA \) is the area of the disk, and the radius is \( 2\text{.} \) The area of a circle is \( \pi r^2\text{,} \) as in the video Dobbelt integral:
\[ \iint_D dA = \pi \cdot 2^2 = 4\pi \]
This gives us:
\[ \oint_C \vec{F} \cdot d\vec{r} = 2 \cdot 4\pi = 8\pi \]
Exercise 4
- Flere oppgaver om dobbeltintegraler,
- Flere oppgaver om polarkoordinater,
- Flere oppgaver om variabelskifte
Exercise 4a)
Let be the half-disk
Compute the double integral
Show solutionHide solution for exercise 4a
Answer
The region is half a disk, so we change to polar coordinates. Then both \( r \) and \( \theta \) get fixed limits.
1. Draw a sketch
We draw a sketch first. \( H \) is the upper half of the disk with radius \( 2\text{:} \)
2. Change to polar coordinates
In polar coordinates:
\[ \textcolor{blue}{y} = \textcolor{blue}{r\sin\theta}, \qquad \textcolor{red}{dA} = \textcolor{red}{r\,dr\,d\theta} \]If you are unsure about changing to polar coordinates, you can watch the video Dobbelt integral.
The radius goes from the center out to the arc, and the angle from the positive to the negative \( {x\text{-axis}}\text{:} \)
\[ 0 \le r \le 2, \qquad 0 \le \theta \le \pi \]
Plugging this in, we get:
\[ \begin{aligned} \iint_H \textcolor{blue}{y}\,\textcolor{red}{dA} &= \int_0^{\pi}\!\!\int_0^2 \textcolor{blue}{r\sin\theta} \cdot \textcolor{red}{r\,dr\,d\theta} \\ &= \int_0^{\pi}\!\!\int_0^2 r^2\sin\theta\,dr\,d\theta \end{aligned} \]
3. Compute the inner integral
We integrate with respect to \( r \) first. The power rule tells us that:
\[ \int r^n\,dr = \dfrac{r^{n+1}}{n+1} + C, \quad n \neq -1 \]If you are unsure about the rule, you can watch the video Basic integrasjonsregler/formler.
Here \( {n = 2}\text{,} \) and \( \sin\theta \) is a constant:
\[ \begin{aligned} \int_0^2 r^2\sin\theta\,dr &= \left[\dfrac{r^3}{3}\right]_0^2 \sin\theta \\ &= \dfrac{8}{3}\sin\theta \end{aligned} \]
4. Compute the outer integral
We integrate a sine function like this, as in the video Basic integrasjonsregler/formler:
\[ \int \sin\theta\,d\theta = -\cos\theta + C \]
This gives us:
\[ \begin{aligned} \int_0^{\pi} \dfrac{8}{3}\sin\theta\,d\theta &= \dfrac{8}{3}\Big[-\cos\theta\Big]_0^{\pi} \\ &= \dfrac{8}{3}\big(-\cos\pi + \cos 0\big) \\ &= \dfrac{8}{3}(1 + 1) = \dfrac{16}{3} \end{aligned} \]
Exercise 4b)
Consider the coordinates defined by
Let be the region described in by
Compute the area of the region (Hint: don't forget the Jacobian!)
Show solutionHide solution for exercise 4b
Answer
The area of is:
In the \( {uv\text{-plane}} \) the region \( R \) is a square. The area is therefore the integral of \( |J| \) over the square, where \( J \) is the Jacobian.
1. Draw a sketch
We draw a sketch first. The square in the \( {uv\text{-plane}} \) becomes the region \( R \) in the \( {xy\text{-plane}}\text{,} \) and the sides of the square become the edges of \( R\text{:} \)
\[ \begin{aligned} v &= 0\text{:} & (x, y) &= (u^2,\ 0) \\ u &= 0\text{:} & (x, y) &= (-v^2,\ 0) \\ u &= 1\text{:} & (x, y) &= (1 - v^2,\ 2v) \\ v &= 1\text{:} & (x, y) &= (u^2 - 1,\ 2u) \end{aligned} \]
2. Write down the change of variables
The change of variables tells us that the area is:
\[ A = \iint_R dx\,dy = \int_0^1\!\!\int_0^1 |J|\,du\,dv \]If you are unsure about the formula, you can watch the video Hvor kommer r fra?.
The Jacobian is, as in the video Regn ut arealet ved hjelp av variabelskiftet:
\[ J = \begin{vmatrix} \dfrac{\partial x}{\partial u} & \dfrac{\partial y}{\partial u} \\ \dfrac{\partial x}{\partial v} & \dfrac{\partial y}{\partial v} \end{vmatrix} \]
3. Compute the Jacobian
We compute a \( 2 \times 2\text{ determinant} \) like this, as in the video Hvor kommer r fra?:
\[ \begin{vmatrix} \textcolor{blue}{a} & \textcolor{red}{b} \\ \textcolor{red}{c} & \textcolor{blue}{d} \end{vmatrix} = \textcolor{blue}{ad} - \textcolor{red}{bc} \]
Here are the partial derivatives of \( {x = u^2 - v^2} \) and \( {y = 2uv}\text{:} \)
\[ \begin{aligned} \textcolor{blue}{a} &= \dfrac{\partial x}{\partial u} = \textcolor{blue}{2u} & \textcolor{red}{b} &= \dfrac{\partial y}{\partial u} = \textcolor{red}{2v} \\ \textcolor{red}{c} &= \dfrac{\partial x}{\partial v} = \textcolor{red}{-2v} & \textcolor{blue}{d} &= \dfrac{\partial y}{\partial v} = \textcolor{blue}{2u} \end{aligned} \]
Plugging this in, we get:
\[ \begin{aligned} J &= \textcolor{blue}{2u \cdot 2u} - \textcolor{red}{2v \cdot (-2v)} \\ &= 4u^2 + 4v^2 \end{aligned} \]
Squares are never negative, so:
\[ |J| = |4u^2 + 4v^2| = 4u^2 + 4v^2 \]
4. Compute the area
The power rule tells us that:
\[ \int u^n\,du = \dfrac{u^{n+1}}{n+1} + C, \quad n \neq -1 \]If you are unsure about the rule, you can watch the video Basic integrasjonsregler/formler.
We integrate with respect to \( u \) first, term by term. Here \( v \) is a constant:
\[ \begin{aligned} \int_0^1 (4u^2 + 4v^2)\,du &= \left[\dfrac{4u^3}{3} + 4v^2u\right]_0^1 \\ &= \dfrac{4}{3} + 4v^2 \end{aligned} \]
Then with respect to \( v\text{:} \)
\[ \begin{aligned} A &= \int_0^1 \left(\dfrac{4}{3} + 4v^2\right) dv \\ &= \left[\dfrac{4v}{3} + \dfrac{4v^3}{3}\right]_0^1 = \dfrac{8}{3} \end{aligned} \]
Exercise 5
- Flere oppgaver om divergensteoremet,
- Flere oppgaver om flateintegraler,
- Flere oppgaver om fluks,
- Flere oppgaver om kulekoordinater,
- Flere oppgaver om trippelintegraler
Let be the half-ball of radius such that In other words, we have
Exercise 5a)
Compute the triple integral of the function over
Hint: you can use the integral
Show solutionHide solution for exercise 5a
Answer
The region is a half-ball, so we change to spherical coordinates. Then all three variables get fixed limits.
1. Change to spherical coordinates
In spherical coordinates:
\[ \begin{aligned} \textcolor{blue}{y} &= \textcolor{blue}{\rho\sin\varphi\sin\theta} \\ \textcolor{red}{dV} &= \textcolor{red}{\rho^2\sin\varphi\,d\rho\,d\varphi\,d\theta} \end{aligned} \]The expression for \( y \) is in the video Kulekoordinater, and \( dV \) in the video Kulekoordinater & Trippelintegraler.
2. Find the limits
The half-ball has radius \( 1\text{,} \) and it goes from the top to the bottom of the ball. The angle \( \varphi \) is measured from the positive \( {z\text{-axis}}\text{,} \) so:
\[ 0 \le \rho \le 1, \qquad 0 \le \varphi \le \pi \]
For \( \theta \) we use that \( {y \ge 0}\text{.} \) Since \( {\rho \ge 0} \) and \( {\sin\varphi \ge 0}\text{,} \) this gives:
\[ \rho\sin\varphi\sin\theta \ge 0 \quad \Rightarrow \quad \sin\theta \ge 0 \]
This means that:
\[ 0 \le \theta \le \pi \]If you are unsure about the limits, you can watch the video Eksempel oppgave.
3. Set up the integral
Plugging this in, the integrand becomes:
\[ \begin{aligned} \textcolor{blue}{y} \cdot \textcolor{red}{\rho^2\sin\varphi} &= \textcolor{blue}{\rho\sin\varphi\sin\theta} \cdot \textcolor{red}{\rho^2\sin\varphi} \\ &= \rho^3\sin^2\varphi\sin\theta \end{aligned} \]
This gives us the integral:
\[ \int_0^{\pi}\!\!\int_0^{\pi}\!\!\int_0^1 \rho^3\sin^2\varphi\sin\theta\,d\rho\,d\varphi\,d\theta \]
4. Compute the inner integral
We integrate with respect to \( \rho \) first, as in the video Eksempel oppgave. Here \( \varphi \) and \( \theta \) are constants:
\[ \begin{aligned} & \int_0^1 \rho^3\sin^2\varphi\sin\theta\,d\rho \\ &= \left[\dfrac{\rho^4}{4}\right]_0^1 \sin^2\varphi\sin\theta \\ &= \dfrac{1}{4}\sin^2\varphi\sin\theta \end{aligned} \]
5. Compute the middle integral
With respect to \( \varphi \) we use the integral from the hint:
\[ \int (\sin u)^2\,du = \dfrac{u}{2} - \dfrac{1}{4}\sin(2u) + c \]
This gives us:
\[ \begin{aligned} \int_0^{\pi} \sin^2\varphi\,d\varphi &= \left[\dfrac{\varphi}{2} - \dfrac{1}{4}\sin(2\varphi)\right]_0^{\pi} \\ &= \dfrac{\pi}{2} - \dfrac{1}{4}\sin(2\pi) - 0 \\ &= \dfrac{\pi}{2} \end{aligned} \]
Here \( \sin\theta \) is a constant, so the middle integral becomes:
\[ \begin{aligned} \int_0^{\pi} \dfrac{1}{4}\sin^2\varphi\sin\theta\,d\varphi &= \dfrac{1}{4}\sin\theta \cdot \dfrac{\pi}{2} \\ &= \dfrac{\pi}{8}\sin\theta \end{aligned} \]
6. Compute the outer integral
We integrate sine like this, as in the video Eksempel oppgave:
\[ \int \sin\theta\,d\theta = -\cos\theta + C \]
This gives us:
\[ \begin{aligned} \iiint_H y\,dV &= \int_0^{\pi} \dfrac{\pi}{8}\sin\theta\,d\theta \\ &= \dfrac{\pi}{8}\Big[-\cos\theta\Big]_0^{\pi} \\ &= \dfrac{\pi}{8}\big(-\cos\pi + \cos 0\big) \\ &= \dfrac{\pi}{8}(1 + 1) = \dfrac{\pi}{4} \end{aligned} \]
Exercise 5b)
Let denote the boundary of the half-ball Is a closed surface? What is its area? (Hint: the area of a sphere of radius is
Show solutionHide solution for exercise 5b
Answer
is a closed surface, and the area is:
The boundary consists of the curved hemisphere and the flat disk. We check whether they close off \( H\text{,} \) and add the areas.
1. Split up the boundary
The boundary \( B \) consists of two parts, the hemisphere \( \textcolor{blue}{S} \) and the disk \( \textcolor{red}{D} \) in the \( {xz\text{-plane}}\text{:} \)
\[ \begin{aligned} \textcolor{blue}{S} &= \{x^2 + y^2 + z^2 = 1,\ y \ge 0\} \\ \textcolor{red}{D} &= \{x^2 + z^2 \le 1,\ y = 0\} \end{aligned} \]
2. Decide whether the surface is closed
The two parts meet along the same circle:
\[ x^2 + z^2 = 1, \qquad y = 0 \]
There they are joined together, so \( B \) has no edge and encloses all of \( H\text{:} \)
\[ B = \textcolor{blue}{S} \cup \textcolor{red}{D} \]This means that \( B \) is a closed surface, like the surface in the video Fluks gjennom LUKKET FLATE.
3. Compute the area
The hemisphere \( \textcolor{blue}{S} \) is half of a sphere with radius \( 1\text{.} \) The formula from the hint gives:
\[ A_{\textcolor{blue}{S}} = \dfrac{1}{2} \cdot 4\pi \cdot 1^2 = 2\pi \]
The disk \( \textcolor{red}{D} \) has radius \( 1\text{,} \) and the area of a circle is \( \pi r^2\text{,} \) as in the video Dobbelt integral:
\[ A_{\textcolor{red}{D}} = \pi \cdot 1^2 = \pi \]
Altogether we get:
\[ A_B = A_{\textcolor{blue}{S}} + A_{\textcolor{red}{D}} = 2\pi + \pi = 3\pi \]
Exercise 5c)
Let be the outgoing normal vector to the boundary Compute the flux of the vector field across where
Show solutionHide solution for exercise 5c
Answer
From b) we know that \( B \) is a closed surface.
Then we can use the divergence theorem and compute a triple integral over \( H \) instead.
1. Write down the divergence theorem
When \( B \) is a closed surface around \( H \) and \( \vec{n} \) points outward, the divergence theorem tells us that:
\[ \iint_B \vec{F} \cdot \vec{n}\,dS = \iiint_H \nabla \cdot \vec{F}\,dV \]If you are unsure about the divergence theorem, you can watch the video Fluks gjennom LUKKET FLATE.
2. Compute the divergence
The divergence is the sum of the partial derivatives, as in the same video Fluks gjennom LUKKET FLATE:
\[ \nabla \cdot \vec{F} = \dfrac{\partial \textcolor{blue}{F_1}}{\partial x} + \dfrac{\partial \textcolor{red}{F_2}}{\partial y} + \dfrac{\partial \textcolor{green}{F_3}}{\partial z} \]
Here:
\[ \textcolor{blue}{F_1} = \textcolor{blue}{xy}, \quad \textcolor{red}{F_2} = \textcolor{red}{y}, \quad \textcolor{green}{F_3} = \textcolor{green}{-yz} \]
Plugging this in, we get:
\[ \nabla \cdot \vec{F} = \textcolor{blue}{y} + \textcolor{red}{1} + (\textcolor{green}{-y}) = 1 \]
3. Compute the triple integral
The divergence is \( 1\text{,} \) so the triple integral is the volume of \( H\text{:} \)
\[ \iiint_H 1\,dV = V_H \]
The volume of a ball with radius \( r \) is:
\[ V = \dfrac{4}{3}\pi r^3 \]
\( H \) is half a ball with radius \( 1\text{,} \) as in the video Eksempel oppgave:
\[ V_H = \dfrac{1}{2} \cdot \dfrac{4}{3}\pi \cdot 1^3 = \dfrac{2\pi}{3} \]
This gives us:
\[ \iint_B \vec{F} \cdot \vec{n}\,dS = \dfrac{2\pi}{3} \]
Ferdig med settet? Se de andre settene i Matte 3000, eller repeter temaene på fagsiden.